Honda ACCORD HYBRID 2005 Service Manual page 1537

T r u n k L i d W e a t h e r s t r i p
R e p l a c e m e n t
1. Remove the trunk lid weatherstrip (A) by pulling it
off.
2. A p p l y clear weatherstrip sealant (B) into the
channel of the trunk lid weatherstrip all the w a y
around.
3. Locate the painted alignment mark (C or D) on the
trunk lid weatherstrip. Align the painted mark w i t h
the center of the tailgate o p e n i n g , and install the
trunk lid weatherstrip all the w a y around in the
direction s h o w n . Make sure there are no wrinkles in
the weatherstrip.
4. Check for water leaks.
T r u n k L i d D y n a m i c D a m p e r
R e p l a c e m e n t
1. Remove the trunk lid t r i m (see page 20-55).
2. Remove the bolts, then remove the trunk lid
dynamic damper (A). Take care not to scratch the
trunk lid.
6 x 1.0 m m
9.8 N-m
(1.0 kgf.m, 7.2 Ibf-ft)
3. Install the damper in the reverse order of removal.
20-109