Honda ACCORD HYBRID 2005 Service Manual page 1281

18. Remove the self-locking nuts (A) on the under-floor
threeway catalytic converter (TWC) (B).
NOTE: Use new self-locking nuts on reassembly.
10 x 1.25 m m
19. Remove the self-locking nuts (B) on the front of the
exhaust pipe A .
NOTE: Use new self-locking nuts on reassembly.
10 x 1.25 m m
20. Remove the exhaust pipe A m o u n t (B), then
remove the exhaust pipe A w i t h the TWC.
8 x 1.25 mm
2 1 . Remove the P/S heat baffle plate (A).
6 x 1.0 mm
(cont'd)
17-49