Honda ACCORD HYBRID 2005 Service Manual page 1349

®
B r a k e P e d a l a n d B r a k e P e d a l P o s i t i o n
Pedal Height
1. Turn the brake pedal position switch (A)
counterclockwise, and pull it back until it is no
longer touching the brake pedal.
S w i t c h / I d l e S t o p S w i t c h A d j u s t m e n t
2. Disconnect idle stop switch connector (B).
3. Turn the idle stop switch counterclockwise, and
pull it back until it is no longer t o u c h i n g the brake
pedal.
4. Lift up the carpet. At the insulator cutout, measure
the pedal height (C) f r o m the left side of the pedal
pad (D).
Standard pedal height (with carpet removed):
177 mm (6 31/32 in.)
5. Loosen t h e pushrod locknut (A), and screw the
pushrod in or out w i t h pliers until the standard
pedal height f r o m the floor is reached. After
adjustment, tighten the locknut firmly. Do not
adjust the pedal height w i t h the pushrod pressed.
Lower the pedal
(cont'd)
19-5