Honda ACCORD HYBRID 2005 Service Manual page 1531

R e a r B u m p e r R e m o v a l / I n s t a l l a t i o n
Special Tools Required
KTC t r i m tool set SOJATP2014 *
• Available t h r o u g h the A m e r i c a n Honda Tool and Equipment Program; call 888-424-6857
NOTE:
• Have an assistant help y o u w h e n r e m o v i n g and installing the rear bumper.
• Use the appropriate tool f r o m the KTC t r i m tool set to avoid damage w h e n prying c o m p o n e n t s .
• Take care not to scratch the rear bumper and body.
• Put on gloves to protect your hands.
1. Remove the rear bumper as s h o w n .
2. Install the bumper in the reverse order of r e m o v a l , and note these items:
• Make sure the rear bumper engages the hooks of the side spacers and upper brackets on both sides securely.
• Replace any damaged clips.
Fastener Locations
A • : Bolt, 2 B • : Screw, 2 C • : S c r e w , 6 D > : Clip, 2
HOOKS
SIDE S P A C E R
/
UPPER B R A C K E T
RIGHT REAR
INNER FENDER
REAR BUMPER B E A M
C
C
CAP
/
CAP D
6 x 1.0 m m
9.8 N-m
(1.0 kgf-m, 7.2 Ibf-ft)
D
REAR BUMPER
20-103