Driveline/Axle
D r i v e s h a f t R e m o v a l (cont'd)
Pull the knuckle o u t w a r d , and remove the outboard
joint f r o m the front w h e e l hub using a plastic
hammer.
10. Left driveshaft: Pry the inboard joint (A) f r o m the
differential case w i t h a prybar.
Right driveshaft: Drive the inboard joint (A) off of
the intermediate shaft w i t h a drift and hammer.
Remove the driveshaft as an assembly. Do not pull
on the driveshaft (B), because the inboard joint m a y
come apart. Pull the driveshaft straight out to avoid
damaging the oil seal.
Left driveshaft
Right driveshaft
16-4