Honda ACCORD HYBRID 2005 Service Manual page 869

D and D3 Positions in 3rd gear
• Hydraulic pressure is applied to the 3rd clutch, then the 3rd clutch engages the intermediary shaft 3rd gear w i t h the
intermediary shaft.
• The mainshaft 3rd gear drives the intermediary shaft 4th gear via the intermediary shaft 3rd gear and the 3rd clutch.
• The intermediary shaft 4th gear drives the countershaft 4th gear and the countershaft via the mainshaft 4th gear.
• Power is transmitted to the final drive gear, w h i c h in turn drives the final driven gear.
• Hydraulic pressure is also applied to the 1st clutch, but since the rotation speed of 3rd gear exceeds that of 1st gear,
power f r o m 1st gear is cut off at the one-way clutch.
FINAL DRIVEN G E A R
(cont'd)
14-33