Honda ACCORD HYBRID 2005 Service Manual page 1498

Dashboard
G l o v e B o x R e m o v a l / I n s t a l l a t i o n
Special Tools Required
KTC t r i m tool set SOJATP2014 *
• Available t h r o u g h the A m e r i c a n Honda Tool and
Equipment Program; call 888-424-6857
SRS components are located in this area. Review the
SRS c o m p o n e n t locations (see page 24-11) and the
precautions and procedures (see page 24-13) before
performing repairs or servise.
NOTE:
• Take care not to scratch the dashboard and related
parts.
• Use the appropriate tool f r o m the KTC t r i m tool set to
avoid d a m a g e w h e n prying c o m p o n e n t s .
1. Detach the hook (A) of the glove box damper (B),
and r e m o v e the screws.
Fastener Locations
• : S c r e w , 2
5 x 0.8 m m
2. While holding the glove box (A), release the glove
box stop (B) on each side f r o m the dashboard by
pushing t h e m in, then r e m o v e the glove box.
3. Open the passenger's door, and gently pull out on
the front of the dashboard side cover (A) to release
the hooks (B), and remove the cover.
4. Remove the screw, then remove the glove box
damper (A).
Fastener Location
• : S c r e w , 1
5 x 0.8 m m
5. Install the glove box in the reverse order of
removal.
20-70