Honda ACCORD HYBRID 2005 Service Manual page 1156

Shafts and Clutches
1 s t G e a r O n e - w a y C l u t c h I n s p e c t i o n
1. Hold the 1st-hold clutch hub (A), and turn the 1st
gear (B) in the direction s h o w n t o be sure it turns
freely. Also make sure the 1st gear locks in the
opposite direction.
B
2. If any problem occurs on the 1st gear one-way
clutch, replace the 1st clutch hub (C). The 1st gear
one-way clutch is not available separately f r o m the
1st clutch hub.
1st C l u t c h H u b R e p l a c e m e n t
Special Tools Required
• Driver 07749-0010000
• Driver attachment 07947-6340500
• Attachment, 78 x 90 m m 07GAD-SD40101
1. Remove the 1st-hold clutch hub (A) f r o m the 1st
gear (B) w i t h the special tools and a press.
2. Remove the 1st clutch hub (C) f r o m the 1st gear,
then install the new 1st clutch hub in the 1st gear.
14-320