Honda ACCORD HYBRID 2005 Service Manual page 1087

© 0
42. Install the harness clamp bracket (A) and connector
bracket (B), and install the harness clamp (C) on the
clamp bracket.
43. Connect the A/T clutch pressure control solenoid
valve C connector (D).
44. Secure the harness cover w i t h the bolt, and
connect the A/T clutch pressure control solenoid
valve A connector, the A/T clutch pressure control
solenoid valve B connector, and the 4th clutch
transmission fluid pressure switch harness
connector (C).
6 x 1.0 m m
9.8 N m (1.0 k g f m , 7.2 Ibf-ft)
45. Secure the harness clamp bracket w i t h the bolts.
46. Attach the shift cable end (A) to the control lever (B),
then insert the control pin (C) into the control lever
hole t h r o u g h the shift cable end, and secure the
control pin w i t h the spring clip/washer (D).
47. Secure the shift cable bracket (E).
(cont'd)
14-251