Honda ACCORD HYBRID 2005 Service Manual page 1194

Automatic Transmission
T r a n s m i s s i o n R e a s s e m b l y ( c o n t ' d )
79. Install new O-rings (11.7 m m dia.) (A) on the
suction pipe (B), then install the suction pipe in the
t o r q u e converter housing w i t h the filter end t o w a r d
the outside of the housing.
80. Install a new O-ring (11.7 m m dia.) (A) and a new O-
ring (11.0 m m dia.) (C) on the ATF feed pipe (D),
t h e n install the feed pipe w i t h the large end in the
t o r q u e converter housing.
8 1 . Install the dowel pins (E) in the torque converter
housing.
82. Install a new O-ring (F) in the groove of the auxilialy
transmission fluid p u m p (ATFP) assembly. Do not
apply a O-ring (F) w i t h ATF.
83. Install the ATFP (G) on the torque converter
housing. Do not pinch the O-ring.
B
8 x 1 . 2 5
m m
2 6
N-m
(2.7 kgf-m, 2 0 Ibf-ft) D
14-358