Honda ACCORD HYBRID 2005 Service Manual page 1084

Automatic Transmission
T r a n s m i s s i o n I n s t a l l a t i o n ( c o n t ' d )
26. Install the steering gearbox heat shield.
6 x 1.0 m m
9.8 N-m
(1.0 k g f m , 7.2 Ibfft)
27. Connect the ATF cooler hose (A) t o the ATF cooler
(B), and secure the hose w i t h the clip (C) (see page
14-256).
A C
28. Connect the front m o u n t control solenoid valve
connector (A), and install the harness clamp (B).
A
29. Install the damper forks (A) w i t h d a m p e r pinch
bolts (B) and the new self-locking nuts (C), then
install the ball joints on the lower arms (D) w i t h the
castle nuts (E) and new cotter pins (F).
/ 1 0 x 1 . 2 5 m m
y
43 N m (4.4 k g f m , 32 Ibfft)
5 8 - 6 5 Ibfft)
30. Install the tie-rod end ball joints (G) t o each knuckle
w i t h the nuts (H) and n e w cotter pins (I).
3 1 . Install the stabilizer links (J) t o the lower arms, and
install the nuts (K). Insert a 6 m m Allen w r e n c h (L)
in the ball joint pin (M), and tighten the nuts.
14-248