Honda ACCORD HYBRID 2005 Service Manual page 1190

Automatic Transmission
T r a n s m i s s i o n R e a s s e m b l y ( c o n t ' d )
54. Install the solenoid valve cover (A) w i t h the t w o
d o w e l pins (B) and the new gasket (C), and secure it
w i t h the seven bolts.
B
55. Place the new gasket (A) on the solenoid valve
cover, then install the 8 x 105.8 m m ATF feed pipes
(B) and the 8 x 58.3 m m pipes (C) w i t h their filter
side into the transmission h o u s i n g .
56. Install the new O-rings (D) over the ATF feed pipes,
and install the A/T clutch pressure control solenoid
valves A and B (E).
57. Install the 8 x 53 m m ATF joint pipe (A) w i t h the
filter side into its m o u n t i n g hole (B).
58. Check the height (A) of the 8 x 53 m m ATF joint
pipe (B) between the t o p (C) of the pipe and the
solenoid valve body m o u n t i n g surface (D). The
height is about 7 m m (0.3 in.) If the height is over
7 m m (0.3 in.), install the pipe securely until it stops
the accumulator body.
14-354