Honda ACCORD HYBRID 2005 Service Manual page 1097

S h i f t C a b l e R e p l a c e m e n t
1. Raise the vehicle, and make sure it is supported
securely.
2. Remove the center console (see page 20-62).
3. Shift the transmission into the R position.
4. Remove the nut securing the shift cable end.
5. Press the holder lock release (A), and pull out the
socket holder (B) to remove the shift cable (C) f r o m
the shift lever bracket base (D).
6. Get the customer's radio anti-theft code (navigation
code), and write d o w n the customer's audio
presets.
7. Disconnect the negative terminal f r o m the battery,
then disconnect the positive t e r m i n a l .
8. Remove the battery hold-down bracket, and
remove the battery and battery tray.
9. Remove the intake air duct and air cleaner housing.
10. Remove the battery base.
11. Remove the nuts securing the shift cable bracket
(A).
6 x 1.0 m m
9.8 N m
(1.0 k g f m , 7.2 Ibfft) '
12. Remove the spring clip/washer (B) and the control
pin (C), then separate the shift cable end (D) f r o m
the control lever (E).
(cont'd)
14-261