Honda ACCORD HYBRID 2005 Service Manual page 1447

Rear Door Glass and Regulator Replacement
NOTE: Put on gloves to protect y o u r hands.
1. Remove these items:
• Door panel (see page 20-15)
• Panel bracket (see step 2 on page 20-12)
• Plastic cover, as needed (see page 20-5)
2. Carefully m o v e the glass (A) until you can see the
bolts, then remove t h e m . Remove the glass f r o m
the regulator (B), and carefully lower the glass.
Take care not to drop the glass inside the door.
Fastener Locations
• : Bolt, 2
6 x 1.0 m m
9.8 N m
(1.0 k g f m , 7.2 Ibfft)
3. Pull the glass run channel (A) away as needed. Pull
the door weatherstrip (B) away as needed, then
remove the screw (C). Remove the bolt (D) securing
the center channel (E).
Fastener Locations
C • : S c r e w , 1 D • : Bolt, 1
(cont'd)
20-19