Honda ACCORD HYBRID 2005 Service Manual page 1140

Torque Converter Housing
S e c o n d a r y S h a f t B e a r i n g R e p l a c e m e n t
Special Tools Required
• Adjustable bearing puller, 25—40 m m
07736-A01000B or 07736-A01000A
• Bearing remover shaft set 30 m m 07936-8890300
• Bearing remover shaft handle 07936-3710100
• Sliding h a m m e r weight 07741-0010201
• Driver 07749-0010000
• A t t a c h m e n t 37 x 40 m m 07746-0010200
• A t t a c h m e n t 62 x 68 m m 07746-0010500
1. Remove the bolt, then remove the lock washer (A)
and bearing set plate (B).
2. Remove the secondary shaft bearing f r o m the
torque converter housing w i t h the special tool and
a commercially available 3/8 " - 1 6 " slide h a m m e r
(A).
3. Remove the ATF guide collar f r o m the torque
converter housing.
4. Remove the 29 x 39 x 9.5 m m secondary shaft
bearing f r o m the torque converter housing w i t h the
special tools.
14-304