Dashboard
D a s h b o a r d / S t e e r i n g H a n g e r B e a m D i s a s s e m b l y / R e a s s e m b l y (cont'd)
6. F r o m the back of the dashboard, Detach the
harness clips (A) f r o m both sides.
Driver's side
Passenger's side
7. On passenger's, side disconnect the glove box light
bulb socket (B), and detach the connectors (C).
8. Remove the screws (A, B) securing the dashboard
(C) and steering hanger beam (D), and detach the
clips (E), then separate the dashboard and steering
hanger beam.
Fastener Locations
A •
: S c r e w , 9
B •
: S c r e w , 8
E > : Clip, 2
5 x 0.8 mm
5 N-m
(0.5 k g f m ,
4 Ibf-ft)
9. Install the dashboard in the reverse order of
removal, and note these items:
• Make sure the dashboard w i r e harness (F) is not
pinched.
• Make sure the connectors are plugged in
properly, and the glove box light bulb socket is
connected securely.
20-78