Honda ACCORD HYBRID 2005 Service Manual page 1181

17. Starting w i t h the 1st-hold clutch plate, alternately
install the plates (A) (3) and discs (B) (3) in the 1st/
1st-hold clutch d r u m (C), then install the 1st-hold
clutch plate B (D) w i t h the flat side d o w n in the
direction s h o w n .
E D
18. Install the disc spring (E) on the 1st-hold clutch
plate B in the direction s h o w n . Starting w i t h the 1st
clutch waved-plate, alternately install the w a v e d -
plates (F) (5) and discs (G) (5), then install the
clutch-end-plate (H) w i t h the flat side d o w n on the
t o p disc.
19. Starting w i t h the 2nd clutch flat-plate, alternately
install the flat-plates (A) (4) and discs (B) (4) in the
2nd clutch d r u m (C), and alternately install the
waved-plates (D) (3) and discs (B) (3). Install the
clutch-end-plate (E) w i t h the flat side d o w n on the
top disc.
20. Install the disc spring (A) in the 3rd clutch d r u m (B)
in the direction s h o w n . Starting w i t h the 3rd clutch
flat-plate, alternately install the flat-plates (C) (3)
and discs (D) (3), and alternately install the waved-
plates (E) (2) and discs (D) (2). Install the clutch-end-
plate (F) w i t h the flat side d o w n on the t o p disc.
(cont'd)
14-345