Honda ACCORD HYBRID 2005 Service Manual page 825

6. Remove the caps (A) and nuts (B).
7. Remove the bolts (A).
8. Remove the battery module (B).
9. Remove the stud bolts (C) f r o m the battery m o d u l e ,
if necessary.
10. Install the parts in the reverse order of removal.
I P U C a s e R e m o v a l / I n s t a l l a t i o n
NOTE: Put on gloves to protect your hands f r o m
electrical shock.
IMA c o m p o n e n t s are located in this area. The IMA is a
high-voltage system. You must be familiar w i t h the IMA
system before w o r k i n g on or around it. Make sure you
have read the IMA service precaution before doing
repairs or service (see page 12-3).
1. Remove the MPI m o d u l e (see page 12-144).
2. Remove the DC-DC converter (see page 12-143).
3. Remove the A/C compressor driver (see page
21-99).
4. Remove the battery module (see page 12-146).
5. Remove the PDU/DC-DC converter heatsink air duct
(see page 12-146).
6. Remove the bolts (A).
A
9.8 N m
(1.0 k g f m , 7.2 Ibfft)
7. Remove the stays (B).
8. Remove the IPU case (C).
9. Install the parts in the reverse order of removal.
12-147