Honda ACCORD HYBRID 2005 Service Manual page 1165

0®
I n t e r m e d i a r y S h a f t I n s t a l l a t i o n H e i g h t I n s p e c t i o n / A d j u s t m e n t
1. Install the intermediary shaft (A) in the torque
converter housing, and install the 26.5 m m washer
(B) on the intermediary shaft.
2. Install the new gasket (C) on the torque converter
housing.
3. Measure the height (D) of the intermediary shaft
installation between the surface (E) of the gasket
and the surface of the 26.5 m m washer (F).
Intermediary Shaft Installation Height
Standard:
133.785-133.885 mm (5.2671-5.2711 in.)
4. If the m e a s u r e m e n t is out of standard, remove the
26.5 m m washer and measure its thickness.
5. Select and install a n e w washer, then recheck the
installation height.
W A S H E R , 26.5 mm
No. Part Number Thickness
A
90564-RDK-000
1.05 m m (0.041 in.)
B
90565-RDK-000
1.13 m m (0.044 in.)
C 90566-RDK-000 1.21 m m (0.048 in.)
D 90567-RDK-000 1.29 m m (0.051 in.)
E 90568-RDK-000 1.37 m m (0.054 in.)
F 90569-RDK-000 1.45 m m (0.057 in.)
G 90570-RDK-000 1.53 m m (0.060 in.)
H 90571-RDK-000 1.61 m m (0.063 in.)
1 90572-RDK-000 1.69 m m (0.067 in.)
J 90573-RDK-000 1.77 m m (0.070 in.)
K 90574-RDK-000 1.85 m m (0.073 in.)
L 90575-RDK-000 1.93 m m (0.076 in.)
M 90576-RDK-000 2.01 m m (0.079 in.)
N 90577-RDK-000 2.09 m m (0.082 in.)
14-329