Honda ACCORD HYBRID 2005 Service Manual page 905

P Position
The PCM controls the shift solenoid valves ON and OFF. The conditions of the shift solenoid valves and positions of
the shift valve are as f o l l o w s :
• The shift solenoid valve A is OFF, and closes the port of shift solenoid valve A pressure (SA); shift valve A stays on
the left side.
• The shift solenoid valve B is t u r n e d O N , and closes the port of shift solenoid valve B pressure (SB); shift valve B and
shift valve E stay on the left side.
• The shift solenoid valve C is OFF, and opens the port of shift solenoid valve C pressure (SC); shift valve C and shift
valve D m o v e to the right side.
• The shift solenoid valve D is t u r n e d ON, and opens the port of shift solenoid valve D pressure (SD); reverse control
valve moves to the right side.
The manual valve is m o v e d to the P position, and line pressure (1) becomes line pressure (3) at the manual valve. Line
pressure (3) passes t h r o u g h the reverse control valve, and becomes line pressure (3A), then f l o w s to the servo valve.
Line pressure (3A) pushes the servo valve to the reverse position. Line pressure (3) f l o w s to the manual valve via the
reverse CPC valve and shift valve A, and stops at the manual valve. Hydraulic pressure is not applied the clutches.
NOTE: W h e n used, " l e f t " or " r i g h t " indicates direction on the hydraulic circuit.
1 S T C L U T C H /
1 S T 1 S T - H O L D C L U T C H 2 N D
A C C U M U L A T O R
2 N D 2 N D C L U T C H 2 N D 3 R D C L U T C H
j £ P
I T R H
A C C U M U L A T O R T R A N S M I S S I O N
C L U T C H
T R A N S M I S S I O N C L U T C H
4 T H CLUTCH 5 T H 4 T H
TRANSMISSION CLUTCH CLUTCH
FLUID ^ . U n A /TSfiFJSP 5 ™
A C C U M U L A T O R
S H I F T S O L E N O I D
J V A L V E B .
O N ( C L O S E )
S H I F T S O L E N O I D
3 V A L V E C :
O F F ( O P E N )
S H I F T S O L E N O I D
j V A L V E A .
O F F ( C L O S E )
A / T C L U T C H
P R E S S U R E C O N T R O L
S O L E N O I D V A L V E S
14-69