Honda ACCORD HYBRID 2005 Service Manual page 1073

34. Insert a 6 m m Allen w r e n c h (A) in the top of the ball
joint pins (B), and remove the nuts (C), then
separate the stabilizer links (D) f r o m the lower arms
(E).
35. Remove the cotter pins (F), castle nuts (G), damper
pinch bolts (H), self-locking nuts (I), bolts (J), and
damper forks (K), then separate the ball joints f r o m
the lower arms (see step 12 on page 18-15).
36. Remove the cotter pins (L) and nuts (M), and
separate the steering tie-rod end ball joints (N)
f r o m the knuckles (see step 10 on page 18-15).
37. Remove the steering gearbox heat shield.
38. Disconnect the front m o u n t control solenoid valve
connector (A), and remove the harness clamp (B).
39. Remove the ATF cooler hose (A) f r o m the ATF
cooler (B). Turn the end of the cooler hose up to
prevent ATF f r o m f l o w i n g out, then plug the hose.
(cont'd)
14-237