Honda ACCORD HYBRID 2005 Service Manual page 1324

Front Suspension
S t a b i l i z e r B a r R e p l a c e m e n t
1. Raise the front of the vehicle, and support it w i t h
safety stands in the proper locations (see page 1-7).
2. Remove the front wheels.
3. Disconnect the stabilizer links f r o m the stabilizer
bar on the right and left (see page 18-23).
4. Remove the subframe (A) f r o m the body (see page
20-134).
5. Remove the flange bolts (B) and bushing holders
(C), then remove the bushings (D) and the stabilizer
bar(E).
6. Install the stabilizer bar in the reverse order of
removal, and note these items:
• Note the right and left direction of the stabilizer
bar.
• Align the ends of the paint marks (A) on the
stabilizer bar w i t h each end of the bushings (B).
• Note the fore/aft direction of the bushing holders,
• Refer to Stabilizer Link Replacement to connect
the stabilizer bar to the links (see page 18-23).
18-24