Honda ACCORD HYBRID 2005 Service Manual page 1040

Automatic Transmission
P r e s s u r e T e s t (cont'd)
18. Connect the oil pressure gauge to the 3rd clutch
pressure inspection hole (E).
F
20. Connect the oil pressure gauge to the 5th clutch
pressure inspection hole (G).
2 1 . Start the engine w i t h the transmission in the P
position w h i l e pressing the brake pedal.
22. Shift to the 2 position, and release the brake pedal;
the transmission is in 2nd gear.
23. Press the accelerator pedal very slowly so that the
engine speed increases to 2,000 r p m in 10 seconds,
then hold the accelerator.
24. Hold in the 2 position at 2,000 r p m , shift into N for
1 second, then to the D3 position; the transmission
w i l l shift to 3rd gear, and measure the 3rd clutch
pressure at the 3rd clutch pressure inspection hole
(E) w h i l e holding the engine speed at 2,000 r p m .
25. Shift to the D position, and measure the 4th clutch
pressure at the 4th clutch pressure inspection hole
(F) while holding the engine speed at 2,000 r p m ,
then in about 15 seconds, the transmission w i l l
shift to the 5th gear.
26. Measure the 5th clutch pressure at the 5th clutch
pressure inspection hole (G) w h i l e holding the
engine speed at 2,000 r p m .
Pressure Fluid Pressure Pressure
Standard Service Limit
3rd clutch 8 9 0 - 9 7 0 kPa 840 kPa
(E) ( 9 . 1 - (8.6 kgf/cm 2 ,
4th clutch 9.9 kgf/cm 2 ,
120 psi)
(F) 1 3 0 - 1 4 0 psi)
5th clutch
(G)
14-204