Honda ACCORD HYBRID 2005 Service Manual page 1558

Openers
H o o d L a t c h R e p l a c e m e n t (cont'd)
4. Remove the bolts, then r e m o v e the hood latch (A)
f r o m the body.
Fastener Locations
5. Disconnect the hood opener cable (B) f r o m the
hood latch. Take care not to bend the cable.
6. Install the latch in the reverse order of r e m o v a l , and
note these items:
• Apply multipurpose grease to each location
indicated by the arrows.
• Make sure the hood opener cable is connected
properly and hood latch switch connector is
plugged in properly.
• Adjust the hood latch a l i g n m e n t (see step 4 on
page 20-104).
• Make sure the hood opens properly and locks
securely.
H o o d R e l e a s e H a n d l e R e p l a c e m e n t
1. Remove the kick panel (see page 20-45).
2. Remove the bolts, then remove the hood release
handle (A).
Fastener Locations
t i.u K g r m ,
7.2 Ibfft)
3. Disconnect the hood opener cable (B) f r o m the
hood release handle. Take care not to bend the
cable.
4. Install the hood release handle in the reverse order
of removal, and note these items:
• Make sure the hood opener cable is connected
properly.
• Make sure the hood opens properly.
20-130