Honda ACCORD HYBRID 2005 Service Manual page 1520

Seats
F r o n t S e a t C o v e r R e p l a c e m e n t ( c o n t ' d )
12. Pull back the edge of the seat-back cover all the
w a y around, and release the clips (A), then remove
the seat-back cover.
Driver's
Passenger's
13. Install the cover in the reverse order of removal,
and note these items:
• Reinitialize the OPDS control unit (see page
24-26).
• To prevent wrinkles w h e n installing a seat-back
cover, make sure the material is stretched evenly
over the pad before securing the clips, hooks,
and hook strips.
• Replace any clips you r e m o v e d w i t h new ones
(A). Install t h e m w i t h c o m m e r c i a l l y available
upholstery ring pliers (B).
• Reinstall the front hook (C) and rear hook (D) of
the reinforcing cloth (E) securely.
• Use only original Honda replacement seat-back
covers.
• Make sure the recline m o t o r harness, (driver's
seat) side airbag harness, and OPDS harness
(passenger's seat) are routed properly.
20-92