Honda ACCORD HYBRID 2005 Service Manual page 1314

Front Suspension
K n u c k l e / H u b / W h e e l B e a r i n g R e p l a c e m e n t (cont'd)
Special Tools Required
• Hub dis/assembly tool, 42 m m 07GAF-SD40100
• Ball joint remover, 28 m m 07MAC-SL0A202
• Attachment, 72 x 75 m m 07746-0010600
• Attachment, 78 x 90 m m 07GAD-SD40101
• Driver 07749-0010000
• Support base 07965-SD90100
• Ball joint thread protector, 12 m m 07AAF-SDAA100
Knuckle/Hub Replacement
1. Raise the front of the vehicle, and support it w i t h
safety stands in the proper locations (see page 1-7).
2. Remove the wheel nuts and front w h e e l .
108 N-m
11.0 k g f m ,
79.6 Ibf-ft)
3. Remove the brake hose m o u n t i n g bracket (A).
B
12 x 1.25 m m
108 N m
(11.0 k g f m , 79.6 Ibf-ft)
5. Remove the wheel sensor (A) f r o m the knuckle. Do
not disconnect the wheel sensor connector.
\
6 x 1.0 m m
9.8 N m
(1.0 kgf-m,
7.2 Ibf-ft)
6. Raise the stake (A), and remove the spindle nut (B).
B
24 x 1.5 m m
245 N-m
(25.0 k g f m ,
181 Ibf-ft)
4. Remove the brake caliper bracket m o u n t i n g bolts
(B), and remove the caliper assembly (C) f r o m the
knuckle. To prevent d a m a g e to the caliper
assembly or brake hose, use a short piece of w i r e
to hang the caliper assembly f r o m the
undercarriage. Do not t w i s t the brake hose w i t h
force.
18-14