Honda ACCORD HYBRID 2005 Service Manual page 721

15. Measure resistance between m o t o r rotor position
sensor 6P connector terminals No. 2 and No. 5.
MOTOR ROTOR POSITION S E N S O R 6P C O N N E C T O R
S 2 (BLU)
2 3
S4 (GRN)
W i r e side of female t e r m i n a l s
Is there about 8-10 a?
YES—Go to step 16.
NO—Replace the motor rotor position sensor
(see page 12-154), then go to step 17.
16. Measure resistance between m o t o r rotor position
sensor 6P connector terminals No. 3 and No. 6.
MOTOR ROTOR POSITION S E N S O R 6P C O N N E C T O R
R1 (BLU)
1
4 5 6
3
R2 (GRN)
Wire side of female t e r m i n a l s
Is there about 9 Q ?
Y E S — G o t o step 24.
NO—Replace the motor rotor position sensor
(see page 12-154), then go to step 17.
17. Turn the ignition switch OFF.
18. Reconnect all connectors.
19. Reinstall the IPU lid (see page 12-140), then t u r n the
battery m o d u l e switch ON (see page 12-4).
20. Turn the ignition switch ON (II).
21. Reset the M C M (see page 12-6).
22. Start the engine.
23. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
YES—If DTC P0A3F is indicated, check for poor
connections or loose terminals at the m o t o r rotor
position sensor and the M C M , t h e n go to step 1. If
any other T e m p o r a r y DTCs or DTCs are indicated,
go to the indicated D T C s t r o u b l e s h o o t i n g .
NO—Troubleshooting is complete. •
24. Reinstall the IPU lid (see page 12-140), then t u r n the
battery m o d u l e switch ON (see page 12-4).
25. Update the M C M if it does not have the latest
software, or substitute a k n o w n - g o o d M C M
(see page 12-8).
26. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
YES—If DTC P0A3F is indicated, check for poor
connections or loose t e r m i n a l s at the m o t o r rotor
position sensor and the M C M , then go to step 1. If
any other Temporary DTCs or DTCs are indicated,
go to the indicated D T C s t r o u b l e s h o o t i n g .
NO—If the M C M was updated, t r o u b l e s h o o t i n g is
complete. If the M C M was substituted, replace the
original M C M (see page 12-8). •
12-43