Honda ACCORD HYBRID 2005 Service Manual page 1288

EPS Components
S t e e r i n g G e a r b o x R e m o v a l a n d I n s t a l l a t i o n (cont'd)
13. Loosely install the m o u n t i n g bracket (A) and
gearbox m o u n t i n g bolts on the driver's side of the
gearbox.
10 x 1.25 m m
59 N m (6.0 k g f m , 43 Ibfft)
14. Position the cutout (A) on t h e m o u n t i n g cushion (B)
as s h o w n , and install it on the passenger's side of
the gearbox securely.
10 x 1.25 m m
38 N m (3.9 k g f m , 28 Ibfft)
15. Install the gearbox m o u n t i n g bracket (C) over the
m o u n t i n g cushion.
16. Tighten the flange bolts o n both sides of the
gearbox to the specified t o r q u e alternately in t w o
or m o r e steps.
17. Install the rear engine m o u n t base m o u n t i n g bolts
and subframe rear d a m p e r (A).
49 N-m
(5.0 k g f m , 36 Ibfft)
10 x 1.25 m m
49 N m (5.0 k g f m , 36 Ibfft)
18. Install the transmission lower m o u n t (A).
10 x 1.25 m m
m
kgf m, 28 Ibfft)
10 x 1.25 m m
38 N m (3.9 k g f m , 28 Ibfft)
19. Lower the jack stand, and tighten the m o u n t i n g
bolts to the specified torque.
17-56