Honda ACCORD HYBRID 2005 Service Manual page 1333

5. Remove the flange nut (A) w h i l e holding the joint
pin (B) w i t h a hex w r e n c h (C), and disconnect the
stabilizer link (D) f r o m the stabilizer link bracket (E).
6. Remove the damper lower m o u n t i n g bolt (F), and
disconnect the damper f r o m the knuckle.
7. Remove the wheel sensor (A) f r o m the knuckle. Do
not disconnect the wheel sensor connector.
8. Remove the stabilizer link bracket (B) f r o m the
knuckle.
9. Remove the leading a r m m o u n t i n g bolt (A) f r o m
the knuckle.
59 N m
(6.0 k g f m ,
43 Ibf-ft)
10. Remove the control arm m o u n t i n g nut (A) and
washer (B).
(cont'd)
18-33