Automatic Transmission
T r a n s m i s s i o n I n s t a l l a t i o n ( c o n t ' d )
37. Connect the 2nd clutch transmission fluid pressure
s w i t c h connector.
38. Connect the ATF cooler hoses (A) to the ATF cooler
lines (B), and secure the hoses w i t h the clips (C)
(see page 14-256).
39. Connect the output shaft (countershaft) speed
sensor connector (A), the 3rd clutch transmission
fluid pressure switch connector (B), and the ATF
temperature sensor connector (C).
40. Connect the transmission range switch connector
(D), and install the harness c l a m p (E) on the
connector bracket (F).
4 1 . Connect the input shaft (mainshaft) speed sensor
connector (A) and the auxiliary transmission fluid
p u m p (ATFP) motor connector (B).
14-250