Honda ACCORD HYBRID 2005 Service Manual page 871

D Position in 5th gear
• Hydraulic pressure is applied to the servo valve to engage the reverse selector w i t h the countershaft 5th gear w h i l e
the shift lever in the f o r w a r d range (D, D3, 2, and 1 positions).
• Hydraulic pressure is applied to the 5th clutch, then the 5th clutch engages the mainshaft 5th gear w i t h the
mainshaft.
• The mainshaft 5th gear drives the countershaft 5th gear, w h i c h drives the reverse selector hub and the countershaft.
• Power is transmitted to the final drive gear, w h i c h in t u r n drives the final driven gear.
• Hydraulic pressure is also applied to the 1st clutch, but since the rotation speed of 5th gear exceeds that of 1st gear,
power f r o m 1st gear is cut off at the one-way clutch.
5TH C L U T C H
T O R Q U E C O N V E R T E R
MAINSHAFT 5TH G E A R
MAINSHAFT
C O U N T E R S H A F T
R E V E R S E
S E L E C T O R HUB
R E V E R S E S E L E C T O R
FINAL DRIVE G E A R
S E C O N D A R Y S H A F T
C O U N T E R S H A F T
5TH G E A R
FINAL DRIVEN G E A R
(cont'd)
14-35