Honda ACCORD HYBRID 2005 Service Manual page 1137

S h i f t S o l e n o i d V a l v e R e m o v a l a n d I n s t a l l a t i o n
NOTE: Do not hold the solenoid valve connector to
remove and install the solenoid valve. Be sure to hold
the solenoid valve body.
1. Remove the m o u n t i n g bolts, then remove the
solenoid valves by holding the solenoid valve body.
2. Install the n e w O-rings (E) on each solenoid valve.
NOTE: A new solenoid valve comes w i t h new O-
rings. If y o u install a n e w solenoid valve, use the O-
rings provided on it.
6 x 1.0 m m
12 N m
(1.2 k g f m , 8.7 Ibfft)
6 x 1.0 m m
12 N m
(1.2 k g f m , 8.7 Ibfft)
5. Install shift solenoid valve C ( b r o w n connector) by
holding the shift solenoid valve body; be sure to
install the m o u n t i n g bracket contacts to the bracket
of shift solenoid valve A.
NOTE: Do not install shift solenoid valve C before
installing shift solenoid valve A. If shift solenoid
valve C is installed before installing shift solenoid
valve A, it may damage to hydraulic control system.
6. Install shift solenoid valve B ( b r o w n connector) by
holding the shift solenoid valve body; be sure to
install the m o u n t i n g bracket contacts to the
accumulator body.
3. Install shift solenoid valve D (black connector) by
holding the shift solenoid valve body; be sure to
install the m o u n t i n g bracket contacts to the
accumulator body.
4. Install shift solenoid valve A (black connector) by
holding the shift solenoid valve body; be sure to
install the m o u n t i n g bracket contacts to the
accumulator body.
14-301