Honda ACCORD HYBRID 2005 Service Manual page 609

14. Remove the heat shield (A). Place a jack or support
under the rear suspension subframe. Remove the
m o u n t i n g bolts (B). Remove the rear suspension
subframe.
B
103 N m
(10.5 k g f m , 75.9 Ibf-ft)
15. Remove the bolts (A) and the fuel tank straps (B).
A . B
16. Lift the fuel tank out of the subframe.
Installation
Install the fuel tank straps (A), and tighten the bolts
(B).
B
38 N-m
(3.9 kgf m,
28 Ibf-ft)
Place a jack or support under the rear suspension
subframe. Install the s u b f r a m e , aligning the pins
(A) w i t h the holes in the subframe.
3. Install the remaining parts in the reverse order of
removal.
4j. After installation, do a wheel a l i g n m e n t (see page
18-7).
11-369