Honda ACCORD HYBRID 2005 Service Manual page 793

18. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
YES—lf DTC P15A6 is indicated, check for poor
connections or loose terminals at the U phase
m o t o r current sensor and the M C M , then go to
step 1. If any other T e m p o r a r y DTCs or DTCs are
indicated, go to the indicated D T C s
t r o u b l e s h o o t i n g .
NO—If the M C M was updated, t r o u b l e s h o o t i n g is
complete. If the M C M was substituted, replace the
original M C M (see page 1 2 - 8 ) . •
DTC P15A7 (87): V Phase Motor Current
Sensor Circuit Malfunction
1. Turn the ignition switch ON (II).
2. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Is DTC P0A61, and/or P0A62 indicated?
YES—Do the troubleshooting for DTC P0A61
(see page 12-49), and/or DTC P0A62 (see page
12-52).
N O — G o t o step 3.
3. Reset the M C M (see page 12-6).
4. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Is DTC P15A7 indicated?
Y E S — G o t o step 5.
NO—Intermittent failure, system is OK at this t i m e .
Check for poor connections or loose terminals at
the V phase motor current sensor and the M C M . B
5. Turn the ignition switch OFF.
6. Turn the battery m o d u l e switch OFF (see page 12-4).
7. Remove the IPU lid (see page 12-140).
(cont'd)
12-115