G l o v e B o x L o c k C y l i n d e r R e p l a c e m e n t
NOTE: Take care not to scratch the glove box.
1. Remove the glove box (see page 20-70).
2. Pull out the glove box knob (A) and use a hooked-
shaped tool to pull the top end of the retainer (B)
out of its slot (C).
NOTE: Do not remove the retainer entirely. Leave
the other side of it in the original position w h e n
r e m o v i n g and installing the lock cylinder.
C
3. Remove the glove box lock cylinder (A).
4. Reinstall the t o p of the retainer (A) in its original
position, then reinstall the lock cylinder (B).
Push the cylinder into place securely until the
retainer snaps into place.
20-71