Honda ACCORD HYBRID 2005 Service Manual page 1339

S t a b i l i z e r B a r R e p l a c e m e n t
1. Raise the rear of the vehicle, and support it w i t h
safety stands in the proper locations (see page 1-7).
2. Remove the rear wheels.
3. Disconnect the stabilizer links f r o m the stabilizer
bar (A) on the right and left (see page 18-38).
8 x 1.25 m m
4. Remove the flange bolts and bushing holders (B),
then remove the bushing (C) and the stabilizer bar.
5. Install the stabilizer bar in the reverse order of
r e m o v a l , and note these items:
• Note the right and left direction of the stabilizer
bar.
• Do not set the bushing (A) on the bent or curved
part of the stabilizer bar (B).
• Refer to Stabilizer Link Replacement to connect
the stabilizer to the links (see page 18-38).
8 x 1.25 mm
22 N-m
(2.2 k g f m , 16 Ibfft)
18-39