Honda ACCORD HYBRID 2005 Service Manual page 550

Active Control Engine Mount (ACM) System
D T C T r o u b l e s h o o t i n g (cont'd)
18. Reconnect all connectors.
19. Turn the ignition switch ON (II).
20. Reset the PCM with the HDS.
2 1 . Do the PCM idle learn procedure (see page 11-340).
22. Test-drive the vehicle for 20 minutes in the range of
the recorded freeze data.
23. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs with the HDS?
YES—If DTC P15B1 is indicated, check for poor
connections or loose terminals at the PCM and the
engine m o u n t control unit, then go to step 1. If any
other Temporary DTCs or DTCs are indicated, go to
the indicated D T C s t r o u b l e s h o o t i n g .
NO—Troubleshooting is c o m p l e t e . •
24. Update the PCM if it does not have latest software,
or substitute a k n o w n - g o o d PCM (see page 11-6).
25. Check for Temporary DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
YES—If DTC P15B1 is indicated, check for poor
connections or loose t e r m i n a l s at the PCM and the
engine m o u n t control unit, then go to step 1. If any
other Temporary DTCs or DTCs are indicated, go to
the indicated D T C s t r o u b l e s h o o t i n g .
NO—If the PCM was updated, troubleshooting is
complete. If the PCM was substituted, replace the
original PCM (see page 11-219). •
11-310