Neighbor Advertisement-Interval - Dell S4810 Reference Manual

Defaults none
Command CONFIGURATION-ROUTER-BGP-ADDRESS FAMILY
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.8.0
Related bgp add-path
Commands prefix without the new paths implicitly replacing any previous ones.

neighbor advertisement-interval

Set the advertisement interval between BGP neighbors or within a BGP peer group.
S4810
Syntax
neighbor {ip-address | peer-group-name} advertisement-interval
seconds
To return to the default value, use the no neighbor {ip-address | peer-
group-name} advertisement-interval command.
Parameters
ip-address
peer-group-
name
seconds
Defaults
•
•
Command ROUTER BGP
Modes
414
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
— allows the advertisement of multiple paths for the same address
(OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
Enter a number as the time interval, in seconds, between
BGP advertisements. The range is from 0 to 600 seconds.
The default is 5 seconds for internal BGP peers and 30
seconds for external BGP peers.
seconds = 5 seconds (internal peers)
seconds = 30 seconds (external peers)
Border Gateway Protocol