Neighbor Advertisement-Interval - Dell Force10 S4810P Reference Manual

both
path-count
Defaults none
Command Modes CONFIGURATION-ROUTER-BGP-ADDRESS FAMILY
Command History
Version 8.3.11.1
Version 8.3.8.0
Related bgp add-path
Commands the new paths implicitly replacing any previous ones.

neighbor advertisement-interval

Set the advertisement interval between BGP neighbors or within a BGP peer group.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax neighbor {ip-address | peer-group-name} advertisement-interval
seconds
To return to the default value, use the no neighbor {ip-address | peer-group-
name} advertisement-interval command.
Parameters
ip-address
peer-group-name
seconds
Defaults
Command Modes ROUTER BGP
Command History
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
382
Enter the keyword both to indicate that the system will send and
accept multiple paths from peers.
Enter the number paths supported. The range is 2 to 64.
Introduced on the Z9000.
Introduced on the S4810.
– allows the advertisement of multiple paths for the same address prefix without
(OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
Enter the name of the peer group to set the advertisement interval for
all routers in the peer group.
Enter a number as the time interval, in seconds, between BGP
advertisements. The range is 0 to 600 seconds. The default is 5
seconds for internal BGP peers and 30 seconds for external BGP
peers.
• seconds = 5 seconds (internal peers)
• seconds = 30 seconds (external peers)
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.