Server (Radius Server Group) - Allied Telesis IE340 Series Command Reference Manual

RADIUS C
OMMANDS
(RADIUS
SERVER SERVER GROUP

server (RADIUS server group)

Overview This command adds a RADIUS server to a server group in RADIUS Server Group
Configuration mode. The RADIUS server should be configured by the
host
The device adds each server to the end of the group's list of servers, so add the
servers in order of priority. If you add a server and it is already in the list, it will be
removed and then re-added to the end of the list.
The server is identified by IP address and authentication and accounting UDP port
numbers. So a RADIUS server can have multiple entries in a group with different
authentication and/or accounting UDP ports. The auth-port specifies the UDP
destination port for authentication requests to the server. To disable
authentication for the server, set auth-port to 0. If the authentication port is
missing, the default port number is 1812. The acct-port specifies the UDP
destination port for accounting requests to the server. To disable accounting for
the server, set acct-port to 0. If the accounting port is missing, the default port
number is 1813.
Use the no variant of this command to remove a RADIUS server from the server
group.
server {<hostname>|<ip-address>} [auth-port <0-65535>]
Syntax
[acct-port <0-65535>]
no server {<hostname>|<ip-address>} [auth-port <0-65535>]
[acct-port <0-65535>]
C613-50631-01 Rev A
)
command.
Parameter Description
<hostname>
Server host name
<ip-address>
Server IP address
The server is identified by IP address, authentication and
accounting UDP port numbers. So a RADIUS server can have
multiple entries in a group with different authentication and/or
accounting UDP ports.
auth-port
Authentication port
The auth-port specifies the UDP destination port for
authentication requests to the server. To disable authentication
for the server, set auth-port to 0. If the authentication port is
missing, the default port number is 1812.
<0-65535>
UDP port number (default: 1812)
acct-port
Accounting port
The acct-port specifies the UDP destination port for accounting
requests to the server. To disable accounting for the server, set
acct-port to 0. If the accounting port is missing, the default port
number is 1813.
<0-65535>
UDP port number (default: 1813)
Command Reference for IE340 Series
AlliedWare Plus™ Operating System - Version 5.5.3-0.x
radius-server
2447