JunosE 11.2.x Command Reference Guide A to M
mpls traffic-eng link-management timers periodic-flooding
Syntax
Release Information
Description
Options
Mode
1420
mpls traffic-eng link-management timers periodic-flooding frequency
no mpls traffic-eng link-management timers periodic-flooding
Command introduced before JunosE Release 7.1.0.
Specifies the interval at which bandwidth values are flooded to the entire network.
Configuring a value of 0 turns off flooding. The no version restores the default value, 180.
frequency—Interval in seconds, a value in the range 0–3600
Global Configuration
Copyright © 2010, Juniper Networks, Inc.