Dhcp Server Detect - 3Com 5500-EI PWR Reference Manual

undo dhcp server bootfile-name
In system view, use the following commands to specify the bootfile name in the specified interface
address pool for the client:
dhcp server bootfile-name bootfile-name { all | interface interface-type interface-number }
undo dhcp server bootfile-name { all | interface interface-type interface-number }
View
System view, VLAN interface view
Parameters
bootfile-name: Bootfile name (with the extension name .cfg), in the range 1 to 63 characters.
all: Specifies all interface address pools.
interface interface-type interface-number: Specifies an interface address pool. The interface-type
argument specifies an interface type; the interface-number argument specifies an interface number.
Description
Use the dhcp server bootfile-name command to specify the bootfile name in interface address pool
for the client.
Use the undo dhcp server bootfile-name command to remove the bootfile name from interface
address pool.
No bootfile name is specified in an interface address pool by default.
If you execute the dhcp server bootfile-name command repeatedly, the new configuration will
overwrite the previous one.
Related commands: bootfile-name.
Examples
# Specify bootfile name aaa.cfg in the DHCP interface address pool of VLAN-interface 1.
<Sysname> system-view
Enter system view, return to user view with Ctrl+Z.
[Sysname] interface Vlan-interface 1
[Sysname-Vlan-interface1] dhcp server bootfile-name aaa.cfg

dhcp server detect

Syntax
dhcp server detect
undo dhcp server detect
View
System view
Parameters
None
1-8