3Com S7906E Command Reference Manual page 1958

Features
Device Management
File System
Management
SNMP
RMON
MAC Address Table
Management
System Maintaining
and Debugging
Through the device management function, you can view the current
condition of your device and configure running parameters. This
document introduces the commands for:
Rebooting a device
Configuring the scheduled automatic execution function
Specifying a file for the next device boot
Upgrading Boot ROM
Configuring a detection interval
Configuring temperature alarm thresholds for a board
Clearing the 16-bit interface indexes not used in the current system
Configuring the system load sharing function
Enabling Active/Standby Mode for Service Ports on SRPUs
Configuring the traffic forwarding mode of SRPUs
Configuring the working mode of EA LPUs
Enabling the port down function globally
Enabling expansion memory data recovery function on a board
Identifying and diagnosing pluggable transceivers
A major function of the file system is to manage storage devices, mainly
including creating the file system, creating, deleting, modifying and
renaming a file or a directory and opening a file. This document
introduces the commands for:
File system management
Configuration File Management
FTP configuration
TFTP configuration
Simple network management protocol (SNMP) offers a framework to
monitor network devices through TCP/IP protocol suite. This document
introduces the commands for:
Basic SNMP function configuration
SNMP log configuration
Trap configuration
MIB style configuration
RMON provides an efficient means of monitoring subnets and allows
SNMP to monitor remote network devices in a more proactive and
effective way. This document introduces the commands for RMON
configuration (event group, history group, alarm group, private alarm
group)
A switch maintains a MAC address table for fast forwarding packets. This
document introduces the commands for:
How a MAC Address Table Entry is Generated
Configuring MAC Address Entries
Disabling MAC Address Learning
Configuring the Aging Timer for Dynamic MAC Address Entries
Configuring the MAC Learning Limit
For the majority of protocols and features supported, the system provides
corresponding debugging information to help users diagnose errors. This
document introduces the commands for maintenance and debugging
configuration
Description