Acl Ipv6 Copy - 3Com S7906E Command Reference Manual

[Sysname-acl6-basic-2000]
# Enter the view of an IPv6 ACL that has a name by specifying its number.
<Sysname> system-view
[Sysname] acl ipv6 number 2002
[Sysname-acl6-basic-2002-flow]
# Delete the IPv6 ACL with the number of 2000.
<Sysname> system-view
[Sysname] undo acl ipv6 number 2000
# Delete the IPv6 ACL named flow.
<Sysname> system-view
[Sysname] undo acl ipv6 name flow

acl ipv6 copy

Syntax
acl ipv6 copy { source-acl6-number | name source-acl6-name } to { dest-acl6-number | name
dest-acl6-name }
View
System view
Default Level
2: System level
Parameters
source-acl6-number: Number of an existing IPv6 ACL, which must be in the following ranges:
2000 to 2999 for basic IPv6 ACLs
3000 to 3999 for advanced IPv6 ACLs
source-acl6-name: Name of an existing IPv6 ACL, a case insensitive string of 1 to 32 characters. It must
start with an English letter and cannot be the English word of all to avoid confusion.
dest-acl6-number: Number of a non-existent IPv6 ACL, which must be in the following ranges:
2000 to 2999 for basic IPv6 ACLs
3000 to 3999 for advanced IPv6 ACLs
dest-acl6-name: Name for the new IPv6 ACL, a case insensitive string of 1 to 32 characters. It must
start with an English letter and cannot be the English word of all to avoid confusion. The system will
automatically assign the new ACL a sequence number which is the smallest one among the available
ones in the ACL range for the ACL type.
Description
Use the acl ipv6 copy command to copy an existent IPv6 ACL (namely, the source IPv6 ACL) to
generate a new one (namely, the destination IPv6 ACL), which is of the same type and has the same
match order, match rules, rule numbering step and descriptions.
Note that:
The source IPv6 ACL and the destination IPv6 ACL must be of the same type.
The generated IPv6 ACL does not take the name of the source IPv4 ACL.
1-22