Renewing Needle Bearing In Crankshaft - Seat Leon 2013 Workshop Manual

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
♦ Gauge - VAS 6079-
Work sequence
– Secure dial gauge - VAS 6079- with universal dial gauge
bracket - VW 387- to cylinder block as shown in illustration.
– Position dial gauge against crankshaft web.
– Press crankshaft against dial gauge by hand and set gauge to
"0".
– Push the crankshaft away from the gauge and read the value.
• Axial clearance: 0.066 ... 0.233 mm.
3.3

Renewing needle bearing in crankshaft

Only vehicles with a dual clutch gearbox
Special tools and workshop equipment required
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
♦ Adapter - 22/1- from Kukko
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
♦ Puller - Kukko 21/2-
60
Rep. gr.13 - Crankshaft group