4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
2
Assembly mountings
⇒ "2.1 Exploded view - assembly mountings", page 25
⇒ "2.2 Supporting engine in installation position", page 26
⇒ "2.3 Removing and installing engine mountings", page 29
⇒ "2.4 Removing and installing gearbox mounting", page 29
⇒ "2.5 Removing and installing pendulum support", page 31
⇒ "2.6 Checking adjustment of assembly mountings", page 32
⇒ "2.7 Adjusting assembly mounting", page 32
2.1
Exploded view - assembly mountings
1 - Bolt
❑ renew
❑ Tightening sequence
⇒ page 26
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
2 - Engine support
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
❑ Tightening torque and
respect to the correctness of information in this document. Copyright by SEAT S.A.
sequence
⇒ page 26
❑ Removing and installing
⇒ page 42
3 - Engine support.
❑ With support arm
❑ Removing and installing
⇒ page 29
4 - Bolt
❑ renew
❑ 40 Nm + 90°
5 - Bolt
❑ renew
❑ 20 Nm + 90°
6 - Bolt
❑ 8 Nm
7 - Support bracket
8 - Bolt
❑ renew
❑ 60 Nm + 90°
9 - Pendulum support
❑ Removing and installing
⇒ page 31
10 - Bolt
❑ renew
❑ Tightening torque and sequence
11 - Bolt
❑ renew
❑ Tightening torque and sequence
12 - Bolts
❑ renew
.
⇒ page 26
.
⇒ page 26
.
León 2013 ➤ , León ST 2013 ➤
2. Assembly mountings
25