Securing Engine To Engine And Gearbox Support - Seat Leon 2013 Workshop Manual

4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
♦ Workshop crane - VAS 6100-
Work sequence
– Remove starter ⇒ Electrical system; Rep. gr. 27 ; Starter;
Removing and installing starter
– Hook lifting device - 10-222 A/12- onto gearbox and screw in
the bolt as far as possible.
– Attach workshop crane - VAS 6100- with hooks - 10 - 222 A /
2- to lifting tackle.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Remove bolts -1, 2, 3, 6, 7, 8 and 9- securing gearbox to en‐
gine.
– Separate gearbox from engine.
1.3 Securing engine to engine and gearbox
support
Special tools and workshop equipment required
León 2013 ➤ , León ST 2013 ➤
1. Removing and positioning the engine
19