Checking Distribution Timing - Seat Leon 2013 Workshop Manual

León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
12 - Spacer sleeve
13 - Idler roller
14 - Bolt
❑ 45 Nm
15 - Crankshaft pulley
❑ Contact surface between sprocket and crankshaft must be free of oil
❑ Fitting possible in one position only.
Bend radius of toothed belt
Plug for "TDC" drilling in cylinder block - tightening torque
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
Note
respect to the correctness of information in this document. Copyright by SEAT S.A.
Replace the O-ring if damaged.
– Tighten bolt -arrow- to 30 Nm.
2.3

Checking distribution timing

Special tools and workshop equipment required
♦ Securing bolts - T10340-
84
Rep. gr.15 - Cylinder head, valve gear