Gp 6.9 Spool Storage - GBC eWire Service Manual

GP 6.9 Spool Storage
Always properly store the eWire Supply Spool when it is not in use.
Unopened cartons should always be stored vertically as indicated on the
spool packaging. Do not remove the packaging or shrink wrap until you
are ready to use the spool.
2. Partially used spools must always be stored vertically. Use the
recommended spool storage rack for best performance.
General Procedures and Information
3. Never store the spool on its side, as wire twisting could occur
4. Do not store the magnet strips on the inside of the element feeder
drawer when not in use, this can cause wire jams. Store the magnets
as shown below on the element feeder drawer or away from the
machine. When storying them on the element feeder, ensure that
they are completely on the flat face of the drawer and are not near the
spool.
Example of improper magnet storage:
01/26/2018
6-62
GBC eWire