GBC eWire Service Manual page 127

5. Remove the M4 Screws (2) from the top of the Front Cover.
6. Slide the Front Cover off the eWire.
GBC eWire
Installation Procedure
1. Tighten the M4 Screws (4) to install the Front Cover to the frame.
Press the Front Cover securely against the frame while tightening to
ensure proper alignment. Refer to Removal Procedure for details.
2. Lower the Upper Transport.
3. Plug in the Power Cord.
4. Switch power ON to the eWire
01/26/2018
4-11
Repairs/Adjustments